| Degreasing
is a process that removes oils, grease, and solid dirt particles from
metal surfaces. Degreasing
prepares a material for finishing applications such as primers,
paints, or bonds. |
| Product |
Type |
Operation |
Application |
|
Caustic Soda |
Hot dip |
For use
with MS & Cast iron components . Not meant for
Non ferrous substrates
|
|
Soda Ash |
Hot dip |
Recommended for non ferrous
substrates
|
|
Caustic & Enzyme
|
Hot dip |
Heavy duty , powerful degreaser
for MS substrates |
|
Emulsion Cleaner
|
Warm spray using
Washing machines
|
For cleaning of components in
washing machines with provision for warm spray .
Suitable for post wash after heat treatment & quenching. |
|
|
|
|
|
|
| Product |
Concentration |
Operation |
Temperature |
Temperature
Time |
FG - 3, FG - 4
&
FG - 6
|
3- 5 % w/v
with water
|
DIP |
80 - 90 °C |
5 - 10 Mins |
FRANK SOL |
5 % v/v with water |
DIP |
60 - 65°C |
5 Mins |
|
|
|
Operational Guidelines |
|
|
- Provision of air agitation in dip process
is necessary for achieving uniform and good cleaning results.
- All degreasing tanks must have an efficient
and continuous oil skimming mechanism in place to keep the surface
of the bath always free from the removed contaminants .
- Consult the respective PRODUCT DATA SHEETS
for a detailed information on bath make up, operation & maintenance
procedures.
|
|
|
|
|
